Light that comes on is a signal; light that stays on is scenery · review
Brennenstuhl states 2,300 lumens, a 10 meter (32.8 ft) detection range with adjustable sensitivity, named Everlight SMD emitters, and spring terminals that need no tools to wire.
The conclusion The one that makes the wiring easy, with an adjustable 10 m (33 ft) range. Worth the premium over the unbranded lights.
Two things separate this from the cheaper floodlights in this hub, and both are practical rather than photometric.
Ten meters, with adjustable sensitivity. Every light in this hub publishes one, from 10 to 21 m (33 to 69 ft), and it is the figure that decides where the light goes: a 10 m (33 ft) sensor covers a normal drive from the house wall and does not cover a long one.
Being able to reduce the sensitivity matters just as much. A floodlight triggering on the pavement is a floodlight the household disables.
You are on a ladder, at arm’s length, in failing light. A spring terminal takes a stripped conductor with a push instead of a screw, and it cannot be under-tightened — which is the commonest fault in an outdoor connection.
It sounds trivial and it is the difference between a straightforward installation and a bad-tempered one.
Everlight SMD LEDs, from an actual manufacturer, rather than an unnamed emitter. It is not a guarantee of anything and it is more information than any other light here provides.
Wiring a fixed mains floodlight on an outside wall is regulated work in several countries. Easy terminals do not alter who is allowed to do it.
Anybody fitting the light themselves, on a normal drive.
On sale at $100 on the American Amazon store at the time of checking.
Prices and availability are what Keepa reported on the date this page was updated; both move.
Prices quoted in this text were read on September 2, 2026. The live price is at the top of the page.
| Power | 20 W |
|---|---|
| Detection | Up to 10 m (33 ft), sensitivity adjustable, stated by Brennenstuhl |
| Emitters | Everlight SMD LEDs |
| Wiring | Tool-free spring terminals |
| Construction | Shock resistant, maintenance free, low heat |
| Output | 2,300 lumens, stated by Brennenstuhl |
| Amazon reference | B0CB8F7Q5S |
| EAN | 4007123684960 |
Because you are usually on a ladder, at arm's length, in poor light, with a screwdriver in one hand. A terminal that accepts a stripped conductor with a push rather than a screw turns an awkward five minutes into thirty seconds — and a better-made connection, because it cannot be under-tightened.
A little. Everlight is a known manufacturer, which means the emitters have a specification behind them rather than being whatever was cheapest that month. It is not a guarantee, and it is more than any other listing in this hub offers.
That depends on where you live and what you are competent to do. A mains floodlight on an external wall is fixed wiring, and in several countries that work is regulated. The terminals make the connection easy; they do not make the job unregulated.
7.5/ 10
The one that makes the wiring easy, with an adjustable 10 m (33 ft) range. Worth the premium over the unbranded lights.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 2, 2026.
Anybody wiring the light themselves — the tool-free terminals genuinely change the job.
Specifications: the manufacturer sheet for home security products and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
20 W · 2,200 lm · 6500 K · IP66 · adjustable SENS, TIME and LUX
A 20 W motion floodlight at 2,200 lumens and 6500 K, rated IP66, with three separate adjustments: sensitivity, on-time and the ambient light level below which it will trigger.
Best for: A first security light where the three adjustment dials matter more than the brand.
21 W · 3,000 lm · 5000 K · wide beam · aluminum · 4 lighting modes
Philips states 3,000 lumens from 21 watts at 5000 K, with a wide beam angle, an aluminum body and four lighting modes selectable on the PIR sensor.
Best for: A wide area — a yard or a double drive — where beam angle matters more than raw output.
20 W · 2,000 lm · 6500 K · 72 LEDs · die-cast aluminum body · adjustable PIR modes
A 20 W floodlight with 72 LED emitters at 2,000 lumens and 6500 K, in a die-cast aluminum housing with an adjustable PIR sensor.
Best for: A position where heat is a concern — die-cast aluminum is what makes a floodlight last.
